List Of Server Commands - Alcatel-Lucent 8950 AAA User Manual

Server Diagnostics and Control Commands
............................................................................................................................................................................................................................................................

List of Server Commands

About Server Commands
This section describes each command by listing the following components:
•
•
•
•
Argument description
The following list describes the special symbols used within the command format line of
each description.
•
•
•
cache
The cache command is used to add, count, delete, or list a cache entry.
Command Format:
cache add KEY[NAME=VALUE][NAME=VALUE]...|count KEY|delete
KEY|list KEY|dump KEY|save FILE|load FILE
The following ][section lists the cache commands and their arguments:
cache add
Description: Adds an entry to the cache.
Command Format:
VALUE]
-live <sec>
-idle <sec>
key
NAME-VALUE
............................................................................................................................................................................................................................................................
2 4 -2
Command name
Brief description of the command
Command format containing syntax and arguments
Table of arguments, if any
Arguments within square brackets ([ ]) are optional.
Arguments within angle brackets (< >) are variables that represent an appropriate
value.
Arguments separated by a pipe symbol (|) indicate that only one of the arguments
can be used for each execution of the command.
cache add [-live <sec>][-idle<sec>] <key> [NAME-
The amount of time, in seconds, for this entry to
reinforce the -live.
The amount of time, in seconds, to remove the entry
from the cache if the entry has not been updated.
The name of the cache entry.
A list of attribute=value pairs.
List of Server Commands
365-360-001R6.0
Issue 1, December 2008