Alcatel-Lucent 8950 AAA User Manual page 444

Server Diagnostics and Control Commands
............................................................................................................................................................................................................................................................
Command Format:
<num> <rule> ::= [<areaCondition>] [<itemCondition>]
[<logLevel>] [<pattern>] {<channel>}
[<areaCondition>]::= AREA=<wildcard value>
[<itemCondition>]::= <variable expression> =<wildcard value>
<num>
<rule>
[<itemCondition>]
[<logLevel>] [<pattern>]
{<channel>}
[<itemCondition>]
expression> =<wildcard value>
logrule list
Description: Lists logging rules.
Command Format:
There are no arguments for this command.
Example
==> logrule list
1
==>
logrule load
Description: Loads logging rules from a file.
Command Format:
<fileName>
logrule move
Description: Moves a logging rule.
Command Format:
numb
logrule remove
Description: Deletes a logging rule.
............................................................................................................................................................................................................................................................
2 4 -1 8
logrule insert <num> <rule>
Specifies where to insert this log rule.
::= rule may be expressed as
[<areaCondition>]
areaCondition, itemCondition,
logLevel, pattern
::=
<variable
itemCondition
variable expression
value.
logrule list
:
area * INFO
logrule load <fileName>
The name of the file from which the logging
rules will be loaded.
logrule move <num> <num>
The start and end logging rule numbers to be
moved.
, or
channel.
may be expressed as a
, or a
wildcard
<ALL> LogToFile
List of Server Commands
365-360-001R6.0
Issue 1, December 2008