The Radius Clients Tab - Alcatel-Lucent 8950 AAA User Manual

Configuring 8950 AAA Client Properties
............................................................................................................................................................................................................................................................
Delete all records
•
Make a copy of selected record
•
Move selected record up
•
Move selected record down
•
You can perform any of the required actions using these action buttons.

The Radius Clients tab

Radius Clients tab
The Radius Clients tab displays information about Radius Clients in different columns.
Table 5-1
Table 5-1 Client/Peers SMT–Radius Clients tab information
Column Name
Client IP Address or Host
Shared Secret
Client classes & Attributes
To go to the Radius Client Properties panel, click on the
Client Properties panel is displayed as shown in
or insert records to the Radius Client Properties. The Radius Client Properties panel, as
shown in
The Radius Client Properties tab that allows to add a record.
•
The Client Classes and Attributes tab that allows to select the required client option.
•
The Comment tab that allows to enter necessary comments.
•
............................................................................................................................................................................................................................................................
5 - 4
displays the Radius Clients tab information.
Figure 5-4, has the following three tabs:
Description
The client IP address, host name, or Fully Qualified
Domain Name (FQDN).
The secret key shared between the 8950 AAA server
and the client. The shared secret must be entered
exactly the same way on both the 8950 AAA and the
client. Errors in entering the secret key is one of the
most common causes of 8950 AAA configuration
problems.
This section shows the names of any Client Classes
to which this client has been assigned. In addition,
any properties (specific Attribute Value Pairs (AVPs)
assigned to the client are displayed. If it contains
#default then there are no assigned classes or
attributes for the client.
Figure 5-4. This panel allows you to add
The Radius Clients tab
action button. The Radius
365-360-001R6.0
Issue 1, December 2008