Alcatel-Lucent 8950 AAA User Manual page 133

Using the 8950 AAA Policy Flow Editor
............................................................................................................................................................................................................................................................
Important!
right click on the Copy a method from another method file icon. Select the desired
method from the policyflow file list. The method gets added in the selected policyflow
file. You can also rename an existing method under the a policyfile.
1. To go to the Method Configuration panel, click the
Configuration panel is displayed as shown in
or insert records to the Method Configuration.
Figure 8-5 PolicyFlow Editor–Method Configuration panel
The Method Configuration panel, as shown in
•
•
•
The Method Configuration tab, as shown in
name and the plug-in to be used for the method.
Use the Advanced tab to specify the additional method attributes as shown in
............................................................................................................................................................................................................................................................
365-360-001R6.0
Issue 1, December 2008
To copy a method under a PolicyFlow file from another method file,
The first section that has two tabs: the Method Configuration tab and the Advanced
tab. Both these tabs allow you to define the properties for the method configuration
fields that are displayed.
The second section that has 4 tabs: the Control tab, the Success Msg tab, the
Failure Msg tab, and the Error Msg tab. These tabs allow you to define the
properties for the method configuration fields that are displayed.
The third section that has five tabs: the Method Properties tab, the Advanced tab,
the Comment tab, the Plug-in Documentation tab, and the PolicyFlow Topics tab.
By default, the Method Properties tab is activated/displayed. This section displays
the Method Properties of the Method Name and Plug-in that is selected.
action button. The Method
Figure 8-5. This panel allows you to add
Figure 8-5, has three sections.
Figure 8-5, allows you to enter the method
Method Configuration
Figure 8-6.
8 - 5