Server Statistics
............................................................................................................................................................................................................................................................
State Changes
Transitions between stages are monitored through the State Change screen as shown in
Figure
There are two panes State Change Total which displays the total state changes and State
Changes in Last Interval which displays the state change which occurred in the last
interval.
Every session consists of three basic stages:
Active State
•
Inactive State, or
•
Waiting for Start
•
Figure 17-16 Server Statistics–State Changes
State Events
Every session reports on the server events via the 8950 AAA Server Statistics. Below is an
example of how the events are presented. There are two tabs namely State Change Total
and State Changes in Last Interval (See
The events are in one of the following states:
Active State
•
Inactive State
•
Waiting for Start
•
............................................................................................................................................................................................................................................................
1 7 -2 2
17-16.
Figure
17-17)
Server Statistics Panel
365-360-001R6.0
Issue 1, December 2008