Alcatel-Lucent 8950 AAA User Manual page 101

Configuring 8950 AAA Client Properties
............................................................................................................................................................................................................................................................
Using the Radius Client Properties tab to Add a record
The Radius Client Properties tab allows you to add a record and enter information in the
required fields as shown in
Figure 5-4 The Radius Client Properties–Add record panel
Table 5-2
Table 5-2 Radius Client Properties
Field Name
Client IP Address or Host
Shared Secret
Dictionary
TAOS Port Normalization
............................................................................................................................................................................................................................................................
365-360-001R6.0
Issue 1, December 2008
Figure
explains each of these fields and the field descriptions.
5-4.
Description
Specifies the Domain name, IP Address, range of IP
addresses, or a CIDR block of addresses.
Shared secret between Policy server and client.
This section shows the names of any Client Classes
to which this client has been assigned. In addition,
any properties (specific Attribute Value Pairs
(AVPs) assigned to the client are displayed. If it
contains #default then there are no assigned classes
or attributes for the client.
Specifies how to get the real NAS port number out
of the NAS port info. This should only be used if
your NASs are running TAOS.
The Radius Clients tab
5 - 5