Alcatel-Lucent 8950 AAA User Manual page 201

Configuring 8950 AAA Operators
............................................................................................................................................................................................................................................................
Figure 11-11 Access Item Configuration Dialog–Command Access Type
As described above for File Pattern, enter a value for Command Pattern using either a
name, a limited wildcard pattern, or the button to the right of the field.
If the selected Access Type is Role, then Rule Pattern appears as the following field, as
shown in
File Pattern and Command Pattern.
Figure 11-12 Access Item Configuration Dialog–Role Access Type
1. Select an appropriate access level from the Access Level drop-down list.
Like the File Pattern, the Access Level list values depend upon the selected Access
Type as shown in
Table 11-8 Access Rules–Access Type and Access Level Components
Access Type
File
............................................................................................................................................................................................................................................................
365-360-001R6.0
Issue 1, December 2008
Figure 11-12. Enter a value for the Rule Pattern in the same way as described for
Table 11-8.
Access Level
Update
Read
None
Description
Allows both read and write access
Allows read only access
Denies access
Adding an Access Rule
11 - 1 5