Alcatel-Lucent 8950 AAA User Manual page 66

Managing 8950 AAA Servers
............................................................................................................................................................................................................................................................
To go to the Simple Network Management Protocol (SNMP) Properties panel, click on the
SNMP option from the Policy Server data pane menu options on the left side. The SNMP
properties panel is displayed as shown in
Figure 4-7 Policy Server–SNMP Properties Panel
The SNMP properties panel specifies the configuration values for the Policy server SNMP
agent. The SNMP agent allows the SNMP clients to retrieve statistical information about
request processing from the policy server through a Radius MIB.
If the SNMP address is set to a valid non-zero address:port combination, the policy server
starts a SNMP agent listener on that address.
Table 4-7
Table 4-7 SNMP properties panel–Properties
Configurable Properties
SNMP Address
Read Community
............................................................................................................................................................................................................................................................
4 - 10
lists the configurable entities of this panel.
Figure 4-7.
Description
Specifies the port to listen to the SNMP requests on.
Entering a value of '0' disables the listener. The SNMP
address defaults to zero (0).
Specifies the read community value that controls access
to read variables. The read community value defaults to
'public'.
Policy Server tab
365-360-001R6.0
Issue 1, December 2008