Alcatel-Lucent 8950 AAA User Manual page 108

Configuring 8950 AAA Client Properties
............................................................................................................................................................................................................................................................
Table 5-4 TACACS+ Clients tab–Properties
Column Name
Shared Secret
Client classes & Attributes
To go to the TACACS+ Client Properties panel, click on the
TACACS+ Client Properties panel is displayed as shown in
allows you to add records to the TACACS+ Clients panel. The TACACS+ Client
Properties panel, as shown in
The TACACS+ Client Properties tab that allows to add a record
•
The Client Classes and Attributes tab that allows to select the required client option
•
The Comment tab that allows to enter necessary comments
•
Using the TACACS+ Client Properties tab to Add a record
The TACACS+ Client Properties tab allows you to add a record and enter information in
the required fields as shown in
............................................................................................................................................................................................................................................................
5 - 12
Description
The secret key shared between the 8950 AAA server
and the client. The shared secret must be entered
exactly the same way on both the 8950 AAA and the
client. Errors in entering the secret key is one of the
most common causes of 8950 AAA configuration
problems.
This section shows the names of any Client Classes
to which this client has been assigned. In addition,
any properties (specific Attribute Value Pairs (AVPs)
assigned to the client are displayed. If it contains
#default then there are no assigned classes or
attributes for the client.
Figure 5-9, has the following three tabs:
Figure 5-9.
The TACACS+ Clients tab
action button. The
Figure 5-9. This panel
365-360-001R6.0
Issue 1, December 2008