1
B
EFORE YOU GO ONSITE
P
C
REINSTALL
HECKLIST
These instructions assume that certain
requirements have been fulfilled prior
to installation. It is recommended that
you call the customer and confirm that
the following are in place before
arriving onsite:
□
Network connection and cable are
available/tested and ready for the
installation to the printer
□
Assigned IP address or DHCP?
□
Location for the printer has been
cleared and ready to receive
printer
□
PC should be able to contact
printer's IP address
□
Open ports between PC and
printer
• SNMP (port 161)
• HTTP (port 80)
• LPR (port 515)
□
Eye-One (ES-1000) Spectrometer
to calibrate printer
□
Equipment (EQ-9800, paper trays
and sample media)
2
S
P
ETUP
RINTER
Setup the printer, install the media and
calibrate the printer. When finished,
print a configuration page to ensure
that the printer is working.
Contents:
EQ-9800 Printer
nd
2
Paper Tray
High Capacity Feeder
Not Shown: Sample Media Pack
(2) Rainbow Toner Packs
Install the m
edia in the following tray
locations:
T
O PRINT A
CONFIGURATION PAGE
1. Press E
NTER
mode.
2.
Use the
Print Pages. Press E
3.
Use the
Configuration. Press E
4.
Display will read [Printing C
2
MPT = All other media sizes
Tray 1 = 10" x 7" 80# cover
Tray 2 = 6" x 6" 100# text
Tray 3 = 8.5" x 11" 100# text
Tray 4 = 8.5" x 11" 80# cover
Tray 5 = 12" x 12" 100# text
to switch to the m
key to scroll down to
.
NTER
key to scroll dow
.
NTER
:
enu
n to
onfig]