Download Print this page

4Gbit/S Fc I/O Module Setting - Fujitsu PRIMERGY 4Gbit/s FC I/O Modules Owner's Manual

Primergy 4gbit/s fc i/o modules
Hide thumbs

Advertisement

5.1

4Gbit/s FC I/O Module Setting

There are two methods for this product setting. The results will bring no difference.
"5.1.1 Using LightPulse Utility / NT"(pg.63)
"5.1.2 Using HBAnyware Utility"(pg.68)
5.1.1
Using LightPulse Utility / NT
This product name displayed in LightPulse Utility/NT is "Adapter * -BX600FC42E -* Port *".
To identify the 4Gbit/s FC I/O Module from LightPulse Utility/NT in an environment where multiple
4Gbit/s FC I/O Module are installed, refer to "Appendix A How to Identify the Adapter" ( pg.74).
1
Click the "Start" button
"Emulex"
When adding this product after installation, the settings for the existing product
may be changed. Therefore, after adding this product or driver, check the detailed
settings and correct them if necessary.
2
Select "Driver Parameters" in the "Category" field.
3
Select "Parameters".
The following parameter data are displayed.
For PG-FCD201, Adapter 0 and 1are displayed.
"Programs" or "All Programs"
"lpUtilNT" in this order.
5 4Gbit/s FC I/O Module Details Setting
E
63

Advertisement

loading

  Related Manuals for Fujitsu PRIMERGY 4Gbit/s FC I/O Modules

This manual is also suitable for:

Primergy pg-fcd201