1. Click [Next].
2. Select "Find the best driver for the device", and click [Next].
3. Check only "CD-ROM drive", and then click [Next].
4. Click [Next].
5. Click [Finish].
7
Click [Finish].
When "System Settings Change" appears, click [Yes] to restart the system.
8
Refer to "1.3 How to Check the Driver Version" ( pg.47) to check
the driver version.
When automatic installation finishes, perform "4.3 Checking and Updating Firmware /BootBIOS"
( pg.58).
For details about the uninstallation procedure, refer to "4.4 Uninstalling HBAnyware" ( pg.61) and
"4.5 Uninstalling AutoPilot Installer" ( pg.61).
54
Need help?
Do you have a question about the PRIMERGY 4Gbit/s FC I/O Modules and is the answer not in the manual?