Download Print this page

Uninstalling Hbanyware; Uninstalling Autopilot Installer - Fujitsu PRIMERGY 4Gbit/s FC I/O Modules Owner's Manual

Primergy 4gbit/s fc i/o modules
Hide thumbs

Advertisement

8
For the BootBIOS version, check the "BootBIOS" value in "Boot
BIOS".
• When the version is "1.70a3", proceed to Step 13.
• When the version is other than "1.70a3", proceed to Step 9.
9
Click the "Update Firmware..." in "Firmware".
When the confirmation dialog appears, click [Yes].
10
Insert the driver disk (CD-ROM) into the CD-ROM drive, select the
BootBIOS file in the CD-ROM drive, and click [Start Download].
[CD-ROM drive]:\FirmBIOS\ZB170A3.PRG
11
When the Firmware update is completed, click [Close].
12
Check that the "BootBIOS" value in "BootBIOS" is "1.70a3".
For PG-FCD201, perform the above procedures for all adapters.
13
After checking versions of all 4Gbit/s FC I/O Module, restart the
server blade to enable the settings, and proceed to "5 4Gbit/s FC I/
O Module Details Setting" ( pg.62).
Perform the above procedures for each 4Gbit/s FC I/O Module.
When replacing this product, perform "4.3 Checking and Updating Firmware /
BootBIOS" ( pg.58) again as necessary.
4.4

Uninstalling HBAnyware

1
Click the "Start" menu
Remove Programs" or "Add/Remove Programs" in this order.
2
Select "Emulex Fibre Channel HBAnyware Version 3.1a8", and click
[Change/Remove] or [Remove].
3
Follow the displayed instructions to uninstall.
4.5

Uninstalling AutoPilot Installer

1
Click the "Start" menu
Remove Programs" or "Add/Remove Programs" in this order.
2
Select "Emulex *****port Miniport Driver Package ******-1b", and
click [Change/Remove] or [Remove].
3
Follow the displayed instructions to uninstall.
"Settings"
"Control Panel"
"Settings"
"Control Panel"
"Add or
"Add or
4 Installing Drivers and Utilities
E
61

Advertisement

loading

  Related Manuals for Fujitsu PRIMERGY 4Gbit/s FC I/O Modules

This manual is also suitable for:

Primergy pg-fcd201