Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual page 98

The options available in the Network Type drop-down list are:
Both — Wired and Wireless – Configures both wired (Ethernet) and wireless network adapters. Use

this option when you have 802.1X configured for all types of network access.
Wireless only – Configures only wireless network adapters.

Wired only – Configures only wired (Ethernet) network adapters.

The options available in the Security Type drop-down list are:
Enterprise (802.1X) – Use this option to setup a network that requires user authentication.

This option is the only available choice when the Network Type is set to "Wired only".
Personal (PSK) – Use this option to setup a network that requires only a pre-shared key (password) to

access the network.
This option is only available when the Network Type is set to "Wireless only".
The Security Type field lets you set the encryption version for the wireless network to WPA or WPA2.
If you have selected the Personal (PSK) security type, you must provide the pre-shared key in the
Password field. Selecting this security type will hide the
tabs.
Click the
the new network configuration settings take effect. Click the
return to the main Onboard configuration user interface.
98 | Onboard
Next button to continue to the
Protocols,
Protocols tab. Click the
Cancel button to discard your changes and
Authentication, and
Save Changes button to make
ClearPass Guest 3.9 | Deployment Guide
Trust