Network Diagnostics - Packet Capturing - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

form. Additional RADIUS attributes may also be included by adding Attribute-Name = Value pairs
in the Extra Arguments field; see the example below.
Routing Table – Displays the current IPv4 routing table. The list shows the static, network addresses

and default routes configured for the system.
Traceroute – Enter a hostname or IP address to determine the route that packets traverse to that host.

The test may take a considerable amount of time (30 seconds or more), depending on network
conditions.
Network Diagnostics – Packet Capturing
The Packet Capture network diagnostic can be used to capture network traffic for in-depth debugging of
network issues. To access the Network Diagnostics tools for Packet Capturing, click the Network
Diagnostics command link on the Administrator > Network Setup page.
372 | Administrator Tasks ClearPass Guest 3.9 | Deployment Guide