Creating A Secondary Network Interface; Table 34 Network Interface States - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

VLAN interfaces are distinguished from other network interfaces with blue icons. The possible states for
the system's network interfaces are summarized in the table below

Table 34 Network Interface States

Interface State
Active (up)
Active with default gateway
Inactive (down)
The actions available when selecting a VLAN interface are:
Show Details – Displays detailed information and statistics about the network interface.

Edit – Change the configuration of the VLAN interface, including IP address, DNS settings, MTU, and

whether to enable the interface when the system starts.
Routes – Define static routes that specify the gateway IP addresses for other networks.

Delete – Removes the VLAN interface.

Bring Up – Enables the VLAN interface.

Bring Down – Disables the VLAN interface.

Cycle – Disables and re-enables the VLAN interface. This operation may be used to renew a DHCP

lease.

Creating a Secondary Network Interface

A secondary network interface is a secondary IP address assigned to a physical network interface. The
secondary network interface is displayed as a separate logical network interface.
From the Network Interfaces page, click the
Create Secondary Interface form will be displayed.
A secondary IP address must be a statically configured IP address. It is not possible to configure more than
one IP address using DHCP on the same network interface.
Click the
The network interface will appear in the list and will be automatically brought up.
368 | Administrator Tasks
Physical
Create Interface button to create a new secondary interface with the specified IP address.
VLAN
Create a secondary network interface link. The
ClearPass Guest 3.9 | Deployment Guide