Configuring Server Time And Time Zone - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual
3.9 deployment guide
Hide thumbs
Also See for PowerConnect W Clearpass 100 Software:
- Deployment manual (438 pages) ,
- Manual (22 pages) ,
- Installation manual (12 pages)
Table of Contents
Advertisement
2. For details on how to complete the SNMP configuration, see
Tasks chapter.
3. Click the
Configuring Server Time and Time Zone
To ensure that authentication, authorization and accounting (AAA) is performed correctly, it is vital that the
server maintains the correct time of day at all times.
To configure the server's time and time zone:
1. Go to Administrator > Server Time.
2. In the Time Zone field, select the server's time zone.
3. It is strongly recommended that you configure one or more NTP servers to automatically synchronize
the server's time. In the Time Servers field, enter the list of NTP servers to use for synchronization.
If available, it is recommended that you use an NTP server that is available on your local network. This
will improve timekeeping and will eliminate the need for additional Internet traffic for the time server.
ClearPass Guest 3.9 | Deployment Guide
Save Changes button to apply the SNMP configuration.
"SNMP Configuration"
in the Administrator
Setup Guide |
43
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the PowerConnect W Clearpass 100 Software and is the answer not in the manual?
Questions and answers