Configuring Network Interfaces - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

2. In the Hostname field, enter the new name. A valid hostname is a domain name that contains two or
more components separated by a period (.).
Hostname parameters are:
Each component of the hostname must not exceed 63 characters

The total length of the hostname must not exceed 255 characters

Only letters, numbers, and the hyphen (-) and period (.) characters are allowed

Hostnames may start with numbers, and may contain only numbers


Configuring Network Interfaces

The Network Interfaces List lets you view details and configure settings for the system's network interfaces.
To configure network interface settings:
1. Go to Administrator > Network Setup > Network Interfaces.
The results of an automated network diagnostic test are displayed at the top of the page. For more
details about the network diagnostics, see
chapter.
2. To change the configuration of a network interface, click the network interface's row in the list, then
click the
LAN and MGT network interfaces may be configured for automatic settings using DHCP or BOOTP, or
can be manually configured for an IP address. When you choose one of these settings from the
Configuration drop-down list, additional options are displayed.
40 | Setup Guide
Edit command. The row expands to provide configuration options.
Automatic Network Diagnostics in the Administrator Tasks
ClearPass Guest 3.9 | Deployment Guide