Creating Sample Reports; Report Based On Modifying An Existing Report - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Creating Sample Reports

Report Based on Modifying an Existing Report

This sample involves modifying the predefined Number of users per day report to report on the number of
users per week.
1. Select the "Number of users per day" report.
2. Click the
3. Click Report Type in the Report Editor, as you need to change the title of the report to "Number of users
per week". Because you want to report on weekly data, the date range should also be changed to a figure
that is divisible by 7. To see the last 6 weeks of user numbers, enter 42 for the date range.
4. Click the
5. Click the Classification option in the Report Editor. The Bin classification needs to be changed from
days to weeks. This is done by clicking on the Bin and then clicking the
6. The Classification method should be changed to Time measurement: bin by weeks. The Bin Offset
may be changed to suit your time zone, See
chapter for more information.
7. Click the
8. Click the
Click the Output Series option because you need to change the formula to calculate in weeks instead of
days. This means changing the expression to multiply by 604800, as shown in the screen below.
Click the
Click the
Click the
Click Final Report to run the report and verify the changes you have made.
350 | Report Management
Edit link. This opens the Report Editor.
Save Changes button to return to the Report Editor.
Save Changes button.
Back to report editor link to return to the Report Editor.
Apply button to make your changes take effect.
Save Changes button at the bottom of the window to save the changes to the output series.
Back to report editor link to return to the Report Editor.
"Binning Example – Time Measurements"
Edit button.
in this
ClearPass Guest 3.9 | Deployment Guide