Configuring The Certificate Authority - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Mark the Send device information to ClearPass Profiler check box when you will use Profiler to
collect device information.
Select the events of interest in the Profiling Events checklist:
When client requests a guest-facing page – Device information is sent to Profiler as soon as a guest-

facing page (such as a Web login page, guest self-registration page, or device provisioning captive portal
page) is requested.
Note: Selecting this option may collect information about devices that are not actively using the

network, i.e. devices that are not logged in.
When client registers a guest account – Device information is sent to Profiler when a guest self-

registration form is completed and a guest account is created or updated.
When client submits a Web login form – Device information is sent to Profiler when a Web login form

is submitted, indicating a login attempt has been made.
When client provisions a device – Device information is sent to Profiler when a valid device

provisioning request has been received.
The Profiling Interval text field may be used to limit the rate of repeated updates for the same client. This
option can be used to reduce the load on the Profiler server, especially if the "When client requests a guest-
facing page" profiling event is enabled.
A primary Profiler server must be configured. Specify the hostname or IP address of the Profiler server in
the Host text field. You must also provide a valid username and password for the Profiler.
A secondary Profiler server may also be configured. This server will be used if the primary Profiler server is
unreachable.
Click the

Configuring the Certificate Authority

To configure certificate authority settings, Navigate to Onboard > Certificate Authority Settings, or
click the Certificate Authority Settings command link.
The Certificate Authority Settings form opens.
This page is used to configure the Onboard certificate authority and to perform maintenance tasks for the
CA.:
Set up a root or intermediate certificate authority (See

68 | Onboard
Save Changes button to apply the new configuration settings.
"Setting Up the Certificate
ClearPass Guest 3.9 | Deployment Guide
Authority")