Figure 13 Clearpass Onboard Process For Onboard-Capable Devices - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual
3.9 deployment guide
Hide thumbs
Also See for PowerConnect W Clearpass 100 Software:
- Deployment manual (438 pages) ,
- Manual (22 pages) ,
- Installation manual (12 pages)
Table of Contents
Advertisement
Figure 13 ClearPass Onboard Process for Onboard-Capable Devices
The Onboard process is divided into three stages:
1. Pre-provisioning. This step is only required for Android devices; the Aruba Networks QuickConnect
app must be installed for secure provisioning of the device.
2. Provisioning. The device provisioning page detects the device type and downloads or starts the
QuickConnect app. The app authenticates the user and then provisions their device with the Onboard
server. The device is configured with appropriate network settings and credentials that are unique to the
device. See
3. Authentication. Once configuration is complete, the user switches to the secure network and is
authenticated using PEAP-MSCHAPv2 unique device credentials.
62
| Onboard
Figure 14 on page 63
for details.
ClearPass Guest 3.9 | Deployment Guide
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the PowerConnect W Clearpass 100 Software and is the answer not in the manual?