Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual page 130

The first section requires that you enter a name for this login page, as well as an optional page name. You
can also provide an optional description of the login page.
To use predefined network settings for NAS equipment, select the appropriate vendor in the Vendor
Settings drop-down list. If your NAS vendor is not listed, or if you would prefer to customize all aspects of
the Web login page, choose Custom Settings
.
Changing the vendor settings may overwrite any customizations you have made to the Header HTML and Footer
HTML.
If you have chosen a specific vendor, the form will display additional options:
The Address option allows you to set the IP address for the NAS, as it will be visible to the guest network.
The Secure Login option controls whether the NAS login should be performed using HTTP or HTTPS.
The vendor's address or hostname must be available to the guest. The DNS may differ for guests and the operator on
the LAN side. If you select Aruba Networks in the Vendor Settings field, then the Aruba controller's IP address
(hostname or IP address only) must be entered in the Address field as no other entries are supported.
When the Dynamic Address check box is selected, the NAS login can be performed using the controller's IP
address as provided to the client. For example, when using an Aruba Networks controller, the controller
performing the redirect sends its IP address using the "switchip" parameter. To use this address for the
guest login, enable the Dynamic Address check box.
130 | RADIUS Services ClearPass Guest 3.9 | Deployment Guide