Scheduling Automatic Backups - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Server Configuration), you can select to back up the entire area or only a particular part of that area. To
access the components within an area, click the down arrow
There are five possible states for each area, described below:
1. Complete backup – The tick mark is highlighted:
displayed, but the entire area and all of its components will be backed up.
2. Partial backup – The down arrow is highlighted:
those that are marked with a tick will be backed up, and those that are marked with a cross will not be
backed up.
3. Partial/complete backup – Both the down arrow and tick marks are highlighted:
components of the area are displayed, and any that have not been specifically marked for no backup will
be changed to a complete backup.
4. Partial/no backup – Both the down arrow and cross marks are highlighted:
of the area are displayed, and any that have not been specifically marked for a complete backup will be
changed to no backup.
5. No backup – The cross is highlighted:
not be backed up.
Click the
save the backup file.

Scheduling Automatic Backups

Click the Backup Schedule command on the Administrator > Backup & Restore page to schedule an
automatic backup. You should schedule backups on a regular basis.
384 | Administrator Tasks
Download Backup button to start the backup. You will be prompted by your Web browser to
.
. The components of the area are not
. The components of the area are displayed;
. The components of the area are not displayed, and will
ClearPass Guest 3.9 | Deployment Guide
. The
. The components