Configuring An Ios Device Passcode Policy - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

In the Sync Settings group, choose one of the following options from the Days of Mail drop-down list:
No Limit

1 day

3 days

1 week

2 weeks

1 month

Click the
configuration user interface.

Configuring an iOS Device Passcode Policy

To make changes to the Passcode Policy configuration that will be sent to a device, go to Onboard >
Passcode Policy, or click the Passcode Policy command link. The Passcode Policy Settings page opens.
This page is used to configure a passcode policy that is applied to iOS devices when provisioned.
Typically, you would enable this policy when provisioning a corporate-owned device, or if you are allowing
a user to access sensitive information remotely.
NOTE: Onboard Passcode Policy settings can only be used with iOS 4 and iOS 5 devices. Other platforms
are not supported.
108 | Onboard
Save Changes button to save the Exchange ActiveSync profile and return to the main Onboard
ClearPass Guest 3.9 | Deployment Guide