Advanced Operator Login Options; Automatic Logout - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Advanced Operator Login Options

The following options are available in the Logging drop-down list:
No logging

Log only failed operator login attempts

Log only Web logins

Log only XMLRPC access

Log all access

Log messages for operator logins, whether successful or unsuccessful, are shown in the application log.

Automatic Logout

The Logout After option in the Advanced Options section lets you configure an amount of idle time after
which an operator's session will be ended.
The value for Logout After should be specified in hours. You can use fractional numbers for values less than
an hour; for example, use 0.25 to specify a 15 minute idle timeout.
202 | Operator Logins ClearPass Guest 3.9 | Deployment Guide