Viewing All Operator Logins; Table 20 Operators Supported In Filters - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Any properties for the operator login that are set to (Default) are taken from the operator profile. The
Operator Filter field lets you select from three other options besides Default:
No operator filter—All guest accounts display.

Only show accounts created by the operator—Only guest accounts created by the operator display.

Only show accounts by operators created within their profile—Only guest accounts created by all

operators within a profile display.
The User Account Filter and Session Filter fields are optional, and allow you to create and configure
these filtering options:
The User Account Filter lets you create a filter for the user account list that cannot be overridden by

the operator. This filter is designated by role and is persistent. For example, this feature is useful in large
deployments where an administrator wants the operators to only have a filtered view of some accounts.
To create an account filter, enter a comma-delimited list of field-value pairs. Supported operators are
described below.
The Session Filter field lets you create a filter that cannot be overridden by the operator for only that

session. To create a session filter, enter a comma-delimited list of field-value pairs. Supported operators
are described below.
The user can enter a simple substring to match a portion of the username or any other fields that are
configured for search, and may include the following operators:

Table 20 Operators supported in filters

Operator Meaning
=
!=
>
>=
<
<=
~
!~
The Account Limit field lets you set a limit for the number of accounts that an operator can create. Note
that disabled accounts are included in the account limit. Leave the Account Limit field blank to use the
Operator profile's account limit setting.
Once all the fields have been completed, click the
of this operator login.

Viewing All Operator Logins

To view a list of operators, go to Administrator > Operator Logins and click the List All Operator
Logins command.
188 | Operator Logins
is equal to
is not equal to
is greater than
is greater than or equal to
is less than
is less than or equal to
matches the regular expression
does not match the regular expression
Additional Information
You may search for multiple values when using the
equality (=) or inequality !=) operators. To specify multiple
values, list them separated by the pipe character ( | ).
For example, specifying the filter "role_id=2|3,
custom_field=Value" restricts the user accounts
displayed to those with role IDs 2 and 3 (Guest and
Employee), and with the field named "custom_field" set
to "Value".
Create Operator Login button to finalize the creation
ClearPass Guest 3.9 | Deployment Guide