Download  Print this page

This Paper Cannot Be Used; Roll Printing Is Selected; Roll Printing Is Selected, But Manual Paper Is Loaded; The Roll Is Empty - Canon imagePROGRAF iPF6400 Basic Manual

Large-format printers.
Hide thumbs

Advertisement

iPF6400
The printer has received a print job longer than the amount of roll paper left when
ManageRemainRoll in the Control Panel menu is On.

This paper cannot be used.

This paper cannot be used.
Cause
Paper that is too large for the printer has been loa-
ded.
Paper that is too small for the printer has been loa-
ded.
Paper has been loaded that is too small to print the
test pattern for printhead adjustment or nozzle
checking.

Roll printing is selected.

Roll printing is selected.
Cause
You have attempted to print on a roll, but no
roll is loaded.

Roll printing is selected, but manual paper is loaded.

Roll printing is selected, but manual paper is loaded.
Cause
A print job for rolls was received when a sheet is
loaded.

The roll is empty.

The roll is empty.
Cause
The roll is empty.
Follow these steps to replace the used roll with a new roll of the same type and size.
1.
2.
3.
Basic Guide
Cause
Press the OK button and load paper of the correct size.
(See "Paper Sizes.")
Press the OK button and load paper of the correct size.
(See "Paper Sizes.")
Press the OK button and load unused paper A4/Letter (vertical) or larger. More
than one sheet may be required depending on the adjustment.
Press ▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the roll,
and then print.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Follow these steps to load and print on a roll.
1.
2.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Press the OK button and remove the roll.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
Load the new roll.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")
→User's Guide
→User's Guide
Corrective Action
→P.11
Press ▲ or ▼ to select Eject Paper, press the OK button, and remove the sheet.
(See "Removing Sheets.")
→P.23
Load a new roll.
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Corrective Action
→P.14
→User's Guide
→P.9
→P.11
→User's Guide
This paper cannot be used.
Corrective Action
Press ▲ or ▼ and select Stop Printing or press
the Stop button to stop printing.
Corrective Action
→P.9
Corrective Action
→P.11
123

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: