Other Messages; Prepare For Parts Replacement; Garo Wxxxx (X Represents A Number); Error Exxx-Xxxx (X Represents A Letter Or Number) - Canon imagePROGRAF iPF6400 Basic Manual

iPF6400

Other Messages

Other Messages

GARO Wxxxx (x represents a number) ............................................................................................................... 137

ERROR Exxx-xxxx (x represents a letter or number) .................................................................................... 137

Hardware error. xxxxxxxx-xxxx (x represents a letter or number) .......................................................... 137

Prepare for parts replacement. .............................................................................................................................. 137

Parts replacement time has passed. .................................................................................................................... 138
Unknown file. .................................................................................................................................................................. 138
Calibration There is a problem with the multi-sensor. .................................................................................. 138
Multi-sensor error ......................................................................................................................................................... 138
Roll feed unit error. ...................................................................................................................................................... 124
No Roll Unit. .................................................................................................................................................................... 124
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
Cause
An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job. The paper was
not advanced because the trailing edge is taped to the roll.
Fastening tape or the Belt Stopper has not been removed inside the Top
Cover.
An error requiring service may have occurred.
Prepare for parts replacement. Prepare for parts replacement.
Cause
It is almost time to replace consumables for
which service is required.
Basic Guide
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Write down the error code and message, turn off the printer, and contact your Canon
dealer for assistance.
Cause
If "Parts replacement time has passed." is displayed, you can continue to use the printer
for some time.
Contact your Canon dealer for assistance.
Corrective Action
Corrective Action
Turn off the printer and remove the roll from the printer before
restoring power.
Turn off the printer, open the Top Cover and remove the tape
or the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds before re-
storing the power.
If the message is displayed again, write down the error code
and message, turn off the printer, and contact your Canon
dealer for assistance.
Corrective Action
GARO Wxxxx (x represents a number)
Corrective Action
137