Download  Print this page

Paprwidth Mismatch; Paper Size Not Detected; Insufficient Paper For Job - Canon imagePROGRAF iPF6400 Basic Manual

Large-format printers.
Hide thumbs

Advertisement

PaprWidth Mismatch

PaprWidth Mismatch
PaprWidth Mismatch
When Detect Mismatch in the Control Panel menu is
set to Pause, the width of the loaded roll does not
match the width specified in Fit Roll Paper Width in
the printer driver.

Paper size not detected.

Paper size not detected.
Paper has been loaded askew, or warped paper has been loaded.

Insufficient paper for job

Insufficient paper for job
The printer has received a print job longer than the amount of roll paper left when
ManageRemainRoll in the Control Panel menu is On.
122
Cause
Cause
Cause
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quali-
ty.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Follow these steps to replace the roll to match the width specified in the printer
driver.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
2.
Replace with paper of the width configured in the printer driver.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Make sure the roll width selected in the dialog box displayed when you select Fit
Roll Paper Width in the printer driver matches the width of the roll loaded in the
printer, and then try printing again.
Press the OK button and reload the paper.
If "Not finished printing. Finish printing
remaining jobs?" is displayed on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page
on which the error occurred.
If this error recurs after you reload the roll,
remove the Roll Holder from the printer,
push the roll firmly in until it touches the Roll
Holder flange, and reload the Roll Holder in
the printer.
Corrective Action
→P.14
→User's Guide
→P.9
→P.11
Corrective Action
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
→P.17
(See "Loading Rolls on the Roll Holder.")
→P.9
Corrective Action
Press ▲ or ▼ to select Print, and then press the
OK button to resume printing.
However, the roll paper may run out during the
print job and you may not be able to print all of
the document.
Press ▲ or ▼ to select Change Paper, and then
press the OK button.
Change the Paper Source of the printer driver,
or replace the roll with a roll that has enough pa-
per for the print job, and then print.
(See "Removing the Roll from the Printer.")
→P.14
(See "Loading Rolls in the Printer.")
iPF6400
→P.11
→P.11
Basic Guide

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: