Removing The Roll From The Printer - Canon imagePROGRAF iPF6400 Basic Manual

Removing the Roll from the Printer

7
Close the Roll Feed Unit Cover.
Important
•
Note
Removing the Roll from the Printer
Removing the Roll from the Printer
Remove rolls from the printer as follows.
•
Once a roll has been advanced, do not pull the paper out by force. This will prevent further feeding, and the printer will
be unable to keep track of the amount of roll paper left.
Important
If you accidentally pull out paper, follow these steps to remove the roll, and open the paper feed slot.
•
If you need to cut the roll, see "Specifying the Cutting Method for Rolls."
Note
1
On the Tab Selection screen of the Control Panel, press ◀ or
▶ to select the
•
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
14
•
Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled. (See "Specifying the
Cutting Method for Rolls.")
Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing quality.
(See "Automatic Adjustment to Straighten Lines and Colors.")
(Paper tab) .
If the Tab Selection screen is not displayed, press the Menu button.
→User's Guide
→P.85
→User's Guide
iPF6400
Basic Guide