Table of Contents
Advertisement
Networking Error Messages
Message
The connection has failed.
Please check network settings.
The address is invalid.
Please check network settings.
Network is down.
Please check network settings.
Network is unreachable.
Please check network settings.
Connection aborted by the server.
Please check network settings.
Connection reset by the server.
Please check network setting.
Connection timed out.
Please check network setting.
Unable to reach the destination host.
Please check network settings.
Failed to connect mail server.
Please check network environment.
Connection error.
Please check network environment.
Failed to create socket for DHCP
Failed to search DHCP server.
Failed to get IP from DHCP server.
Failed to renew IP from DHCP server.
Ping the IP address of the scanner from another PC in a
DOS prompt. For example, type "Ping 10.1.20.144" in a DOS
prompt. If the scanner has no response, then perform the
following steps.
1.
Check if the RJ-45 connector is firmly plugged-in.
2.
Check the Ethernet cable.
3.
Check the scanner's IP address.
4.
Check the destination IP address.
5.
Check Subnet Mask.
6.
Check Gateway IP.
Check network environment.
Check IP address of DHCP server or contact your network
administrator for further help.
Action
Xerox DocuMate 3920
User's Guide
25
Advertisement
Table of Contents
