Calibration Error; Replacing The Adf Pad Assembly - Xerox Duplex Combo User Manual

®
Maintenance Xerox Duplex Combo Scanner

Calibration Error

If there is an error during calibration or if the scanner should disconnect during calibration. The
error will display on-screen. If you see a message that calibration failed, please run the calibration
utility again.
Note: if you attempted to calibrate the scanner with any page other than the calibration page
provided with your scanner, the calibration routine will fail. You will need to power cycle the
scanner, through unplug then re-plug of the USB cable, and then restart the calibration.

Replacing the ADF Pad Assembly

Problems with documents feeding into the ADF is an indication that the pad is wearing thin. The
usage life of the ADF pad varies by what type of documents are generally scanned. Scanning large
batches of heavily textured paper and embossed plastic cards will cause the ADF pad to wear
faster. Large continuous batch scanning will also cause the ADF pad to wear faster. The ADF pad
can be used to scan up to 30,000 pages.
You received a replacement pad in the original scanner box, you can also order a new one.
Replacement parts can be purchased from the Parts & Accessories page for your scanner at
www.xeroxscanners.com.
To replace the ADF Pad:
1. Open the Automatic Document Feeder cover.
User Guide 6-7