Table of Contents
Advertisement
4.
Wipe clean the ADF pad, ADF pad housing, and traction pad.
Traction Pad
5.
Close the cover when you're finished.
Cleaning the Scanner Glass
Scanning items that have excessive amounts of dirt or dust may dirty the glass. To ensure the best
quality scanned item, wipe the scanner glass with a soft, dry, clean cloth to rid the glass of dust or other
debris.
If any residue remains after wiping the glass with a dry cloth, try adding a few drops of Isopropyl
alcohol (rubbing alcohol) to the cloth and wipe off the residue.
If lines appear on the images scanned with the ADF, but not on the Flatbed glass, the thin
NOTE:
plate of glass used by the ADF may be dirty. This glass plate is at one end of the flatbed. When pages
are pulled through the ADF during scanning, this thin glass plate is where the images are captured by
the scanner.
Clean the raised, thin
plate of glass here if
lines appear on scans
from the ADF, but not
from the Flatbed glass.
ADF Pad
ADF Pad Housing
Xerox DocuMate 3920
User's Guide
115
Advertisement
Table of Contents
