To Scan Using Configure Before Scan - Xerox DocuMate 3125 User Manual

® ®
Xerox DocuMate 3125
2. Select the scan configuration Configure Before Scan.
3. Click OK or Apply on the One Touch Properties window.

To Scan Using Configure Before Scan

1. Click the button you set up to use Configure Before Scan.
2. The TWAIN Interface opens.
3. Choose your scan settings, such as the Picture Type of Color, Grayscale or Black & White,
Resolution in DPI, and Page Size.
4. Click the Scan button on the TWAIN Interface.
5. The item is scanned. When finished, click the Done button and the image will be sent to the
Destination Application specified in the One Touch Properties window.
Canceling a Configure Before Scan
Click Cancel in the scanning progress window.
1.
2. The following window will open asking if you want to cancel the entire job.
6-45
Scanning and Configuring One Touch
User's Guide