Pdf Applications - Xerox DocuMate 3125 User Manual

® ®
Xerox DocuMate 3125

PDF Applications

PDF destinations are applications that can open and/or edit the Adobe PDF file format.
Supported file types—applications in the PDF destination group support the *.pdf file format.
When the OmniPage module or software is installed, One Touch includes an option to scan as
sPDF or nPDF. Selecting either of these two formats still creates a *.pdf file, but the "s" and "n"
letters indicate that OCR will process the image before sending the file to the PDF application.
• sPDF—this format creates a *.pdf file that contains the original image of the scanned
page, with a hidden text layer that allows you to search for text in the file.
• nPDF—this format creates a *.pdf file that can be edited in a PDF application. Any pictures
in the scanned image are isolated from the text, the text on the page is recognized and
turned into editable text, and the pictures are placed back into the document in the same
flow as the original document.
Destination type—this destination type is classified as "PDF Link". To make it available in the
destination list, you must select PDF applications on the Options tab in the One Touch
Properties window.
If the PDF application you are using does not appear in the Select destination list, you can add
the application using the Text Documents One Touch Link Properties window.
1. Click on the Options tab in the One Touch Properties window.
2. Make sure PDF applications and Text editing applications are selected then click back on
the button tab.
Please note that any PDF application you add manually to One Touch will be classified as a
"Text Based Link." These applications will only show in the destination list when Text editing
applications are enabled.
6-77
Scanning and Configuring One Touch
User's Guide