Xerox DocuMate 3125 User Manual page 170

Maintenance
Problem: I tried to 'Repair' the One Touch application by using the 'Change' function through
the Add/Remove Program within the Control Panel and was not able to repair it. How do I repair
One Touch?
1. Before attempting to repair One Touch, unplug the USB cable connected to the scanner.
2. Perform the Change/Repair function again. If you are asked for the Install DVD, insert the
disc into the DVD-ROM player and click OK.
3. When prompted, plug the USB cable back into the scanner.
4. When the installation process finishes, click OK on the Complete The Installation window,
and then click Close.
5. Reboot your computer.
Problem: One Touch no longer functions after installing Internet Explorer 7 on Windows XP.
This is a known issue where One Touch stops responding when Internet Explorer 7 is installed
after the scanner. To resolve the issue:
1. Open the Windows Add/Remove Programs feature from the Control Panel.
2. Find Windows Internet Explorer 7 and uninstall it using the change/remove options. Follow
the wizard through a complete removal of the Internet Explorer 7 software.
3. Find One Touch and uninstall it using the change/remove options. Follow the wizard
through a complete removal of the One Touch program.
4. Unplug your scanner's USB cable from the computer.
5. Reboot your computer.
6. Install Internet Explorer 7.
7. Install your scanner driver.
Problem: I am getting an error message that OCR fails every time I try to scan using the OCR
features from One Touch.
Anti-SpyWare software that is set to always run may interfere with the driver functionality. It is
recommended that you temporarily disable or suspend the automatic protection feature during
scanning. After scanning is complete and your file has been saved, turn the auto-protect feature
back on. You do not need to close the Anti-SpyWare software.
Problem: With AutoCrop to Original selected, sometimes I get blank pages, or pages with lines.
The pages were probably scanned in crooked, or skewed. To use AutoCrop to Original, the pages
must be scanned in straight. Adjust the paper guides on the scanner so pages feed in straight.
Problem: The paper jams the ADF.
To reduce the number of paper jams, smooth and straighten the paper before scanning, and
adjust the guides to the paper size. Paper fed into the ADF at an angle can cause the feed
mechanism to jam. If paper jams are occurring more frequently, try cleaning the roller with a
soft cloth dampened with Isopropyl rubbing alcohol. Excessive dust on the roller can make it
appear worn and will cause issues feeding paper. See
cleaning instructions.
Problem: The ADF won't feed pages properly.
User's Guide
Xerox
Cleaning the Scanner on page 152 for
® ®
DocuMate 3125
9-162