To Scan Using Configure Before Scan - Xerox DocuMate 4799 User Manual

Scanning and Configuring One Touch
2. Select the scan configuration Configure Before Scan.
3. Click OK or Apply on the One Touch Properties window.

To Scan Using Configure Before Scan

1. Click the button you set up to use Configure Before Scan.
2. The TWAIN Interface opens.
3. Choose your scan settings, such as the Picture Type of Color, Grayscale or Black & White, Resolution in DPI,
and Page Size.
4. Click the Scan button on the TWAIN Interface.
5. The item is scanned. When finished, click the Done button and the image will be sent to the Destination
Application specified in the One Touch Properties window.
Canceling a Configure Before Scan
1. Click Cancel in the scanning progress window.
2. The following window will open asking if you want to cancel the entire job.
6-48 ®
Xerox DocuMate
User's Guide
®
4799