Xerox DocuMate 3125 User Manual page 95

® ®
Xerox DocuMate 3125
– Sensitivity—you can adjust the sensitivity level of the blank page detection. For
instance, depending on the paper weight, color mode, or image processing options
selected, you might get varying results. Changing the sensitivity level allows you to
fine-tune the accuracy of the blank page detection.
When the number of images reaches—input the maximum number of images you want
in the scanned file. The scanner will create a new file each time that number is reached.
When you are scanning in Duplex mode, the number of images captured is double the
number of pages in the scanner. For example, if you are scanning 12 double-sided pages it
is counted as 24 images. If you want the stack split in half, the number of images reached
would be 12.
7. When you are done making changes, click on OK to save the changes and close the
window.
8. Place your documents in the scanner and start scanning.
When scanning is finished, each file will be sent to the destination location or application you
have selected on the button tab.
Technical Note
• When Instant delivery is also selected on the Options tab, each file will be sent as it is
created.
The options on the Page Settings tab, in the Scan Configuration Properties window will affect
the job separation options as described below:
Skip blank originals
• The Sensitivity you set for this feature is the one that is used when scanning. The sensitivity
level you set in the Options tab will be ignored.
• When you are scanning in Simplex mode and the selected job separator is When a blank
page is detected, the job separation occurs first and a new file will be created each time a
blank page is detected. If you want a single file created with the blank page discarded,
deselect the job separation feature on the Options tab.
Note that when scanning Duplex, both sides of the page must be blank for the job
separation to occur. If both sides of a scanned page are blank, the job separation occurs
first and a new file will be created each time a blank page is detected. If you want a single
file created with the blank page discarded, deselect the job separation feature on the
Options tab or remove the blank page from your scanning batch.
6-87
Scanning and Configuring One Touch
User's Guide