Raw Tcp/Ip Printing; Configuring Raw Tcp/Ip Settings - Xerox Phaser 3330 System Administrator Manual

Raw TCP/IP Printing

Raw TCP/IP is used to open a TCP socket-level connection over Port 9100, and stream a print-ready file
to the printer input buffer. It then closes the connection either after sensing an End Of Job character in
the PDL or after expiration of a preset timeout value. Port 9100 does not require an LPR request from the
computer or the use of an LPD running on the printer. Raw TCP/IP printing is selected in Windows as the
Standard TCP/IP port.

Configuring Raw TCP/IP Settings

1. In Xerox ® CentreWare
Click Raw TCP/IP Printing.
2.
3. For Protocol, select Enable.
4. Ensure that Port Number is set to 9100.
Click Apply.
5.
Enabling Raw TCP/IP Printing at the Control Panel
1. At the printer control panel, press the Menu button.
2. Navigate to Tools, then press OK.
Note: To access this feature at the control panel, log in as an administrator.
3. Navigate to Setup, then press OK.
4. Navigate to Network Settings, then press OK.
Navigate to Network Services, then press OK.
5.
6. Navigate to Port 9100, then press OK.
Navigate to On, then press OK.
7.
To return to the Ready screen, press the Menu button.
8.
® Internet Services, click Properties > Connectivity > Protocols.
Network Connectivity
Xerox Phaser 3330 Printer
® ®
System Administrator Guide
29