Cleaning The Feed Roll - Xerox DocuPrint 305 User Manual

Cleaning the Feed Roll

When feeding cannot be done, follow the procedure below to wipe the feed roll gently with
a well-wrung soft cloth.
There are feed rolls in the interior of this printer (two locations, total of four), tray module
(one location), paper tray (one location) and optional bypass tray (one location).
Inside of printer (two locations)
Open cover A and after uninstalling
the drum/toner cartridge, clean the
feed roll.
The following procedure explains how to clean the feed roll set in the paper tray. Follow this
procedure also when cleaning the feed rolls inside of the printer and the tray module.
Note
• The feed roll is a regular replacement part.
Feed roll
Tray module (one location)
Even without uninstalling the
tray module, you can clean the
feed roll after pulling out the
paper tray.
Bypass tray (one location)
Switch off the power. Pull out the
bypass tray and clean the feed
roll.
Paper tray (one location)
Pull out the paper tray and
clean the feed roll.
6.6 Cleaning the Printer
141