Hard Disk; Print Meter - Xerox DocuPrint 305 User Manual

IPP Spool
[Off] (default)
Select this if you do not want to perform spool processing. When IPP data from a computer
is being processed, data from another computer cannot be received via the same interface.
Specify the IPP specific receive buffer memory capacity between 64 and 1024 KB in
increments of 32 KB. The default is [256K].

[Hard Disk]

Select this to perform spool processing. This uses the hard disk (optional) as the receive
buffer for spool processing.
Note
• [IPP Spool] is displayed when the hard disk (optional) is installed. [IPP Memory] is displayed when the
hard disk is not installed.
Init/Del Data
[Init/Del Data] menu is used to delete data such as the printer setting values stored in the
NV memory and the form data registered in this printer. It is also used to initialize the hard
disk and meter reports.
Note
• Initialization will revert each setting value to default. Refer to "4.3 Menu List" (P. 96) for details.
NVM
Select this to initialize the NV memory. The NV memory is a nonvolatile memory that stores
the printer settings even after power off.
Initializing the NV memory will revert the value for each item to default.
Hard Disk
Select this to initialize the hard disk (optional). The data to be deleted during initialization
includes the additional fonts, the HP-GL and HP-GL/2 forms, and the SMB folders. The
secure print documents, sample print documents, delayed print documents, and their logs
will not be deleted. This item is displayed when the hard disk is installed.

Print Meter

Select this to initialize the printer meter reports. Initialization will change the meter count to
"0".
Refer to
• "Initializing Print Meter Data" (P. 138)
Form
If there are no forms registered, a message saying "Not registered" will be displayed.
Delete PCL Forms
Select this to delete the forms for PCL emulation. All the registered PCL forms are deleted.
Font
If there are no registered fonts, "Not registered" message will be displayed.
Delete PCL Fonts
Select this to delete the fonts for PCL emulation. All the downloaded PCL fonts are deleted.
94
4 Settings on the Control Panel