Paper Tray; Output Tray - Xerox DocuPrint 305 User Manual

PCL
Sets the PCL emulation mode.

Paper Tray

Specifies the paper tray to be used for printing.
Candidate values are as follows:
[Auto] (default)
This searches for the tray loaded with the paper size specified in [Output Size] and
automatically feeds paper from it.
[Tray 1]
[Tray 2]
[Tray 3]
[Tray 4]
[Tray 1 (Bypass)]
Important
• If any tray from [Tray 1] to [Tray 4] is selected, the paper size loaded in the tray will become the paper
size for printing.
Note
• If [Auto] is selected and paper of the same size is loaded in multiple trays in the same direction, paper
will be fed from the tray specified as higher priority in [Tray Priority] under [Printer Settings] of [Admin
Menu]. The default of [Tray Priority] is Tray 1 (highest priority) > Tray 2 > Tray 3 (optional) > Tray 4
(optional) (lowest priority). If paper of the same size is loaded in multiple trays in different directions,
paper loaded in landscape direction will be used first.
• [Tray 3] and [Tray 4] will not be displayed when those optional trays are not installed.
• [Tray 1 (Bypass)] will be displayed only when the bypass tray (optional) is installed. If it is displayed, you
cannot specify [Tray 1].
Output Size
Specifies the paper size to be printed.
Candidate values are as follows:
[A4]
[A3] [A5] [B4] [B5]
[8.5×14] (Legal)
[8.5×11] (Letter)
Output Size (Bypass)
Specifies the paper size to be loaded in the bypass tray (optional).
Candidate values are as follows:
[A4] (default)
[A3] [A5] [B4] [B5]
[8.5×14] (Legal) [8.5×11] (Letter) [8.5×13] [11×17] [7.25×10.5]

Output Tray

Specifies the output tray for printed paper.
[Center Tray] (default)
[Rear Tray]
[OffsetCatchTray]
Note
• [Rear Tray] is available only when the rear tray (optional) is installed.
• [OffsetCatchTray] is available only when the offset catch tray (optional) is installed.
74
4 Settings on the Control Panel