Pulling out paper trays
1.
Pull out all paper trays and remove any
wrinkled paper.
2.
Examine the inside of the printer and
remove any jammed paper.
Note
• When two levels of the optional tray have been
installed and an A5 size (length 148.5 mm) paper is
jammed at the rear of the tray module, hold both
edges of the paper with your hands and pull it out.
After removing the paper
1.
Push the paper transport section and paper
trays completely back into the printer.
2.
Open and close cover A. Doing this will
clear the error message.
5.1 When Paper Jams
103