Paper Jams At The Optional Booklet Maker Tray; Stapler Faults - Xerox Color 550 User Manual

Standard/Booklet Maker Finisher
Note
The machine will not operate if the cover is open even slightly.

Paper jams at the optional booklet maker tray

1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.
3. Turn knob 4a and remove any jammed paper from the optional booklet maker tray.
Note
If paper is torn, check inside the machine and remove it.
4. Close the Right Cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open even
slightly.

Stapler faults

Follow the procedures provided when the output is not stapled or the staples are bent.
Contact our Customer Support Center if the problem persists after you have tried the
following solutions. Stapler faults on output may look similar to the ones shown in the
following illustration.
13-32 Xerox Color 550/560/570 Printer
®
User Guide