Xerox DocuPrint C3055 User Manual page 98

[PostScript]
Sets the settings related to PostScript.
Note
• On the DocuPrint C3055, [PostScript] appears only when the PostScript software kit (optional) is
installed.
Setting Item
PS Error Report
PS Job Time-out
Init PS Disk
Paper Select Mode
Output Color
98
5 Control Panel Menus
Print Language
PostScript
Sets whether to print an error report in case of a PostScript error.
• [On] (default)
• [Off]
Note
• After changing this setting, reboot the printer.
Sets the amount of time the printer waits for a print job. If a time-out occurs dur-
ing data reception, the printer stops the reception and prints the data that has
been received.
Specify the time-out value in 1 minute increments.
• [Off] (default)
Disables the job time-out.
• [1 Minutes] to [900 Minutes]
Note
• After changing this setting, reboot the printer.
Initializes the PostScript information stored in the hard disk (optional).
Note
• [Init PS Disk] appears only when the hard disk (optional) is installed.
Sets whether to enable the PostScript DMS (Deferred Media Selection) fea-
ture.
• [Auto] (default)
Enables the DMS feature.
• [Select From Tray]
Disables the DMS feature and selects a paper tray.
Note
• After changing this setting, reboot the printer.
Sets the output color for PostScript.
• [Color] (default)
• [Black]
Note
• After changing this setting, reboot the printer.
PostScript
PS Error Report
PostScript
PS Job Time-out
PostScript
Init PS Disk
PostScript
PaperSelect Mode
PostScript
Output Color
Description