Adjusting The Image Transfer Voltage - Xerox DocuPrint C3055 User Manual

7.10

Adjusting the Image Transfer Voltage

If the following problems occur frequently, the image transfer voltage may not be
appropriate. Complete the following steps to adjust the voltage.
• White patches appear on images (reduce the voltage)
• Toner scatters around images (increase the voltage)
• Overall images are bluish (increase the voltage)
The image transfer voltage can be adjusted for each paper type within the range of -30 to
30 in increments of 1. The default is "0".
1. Press the <Menu> button on the control
panel to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
3. Press the < > button to accept the
selection.
[Network/Port] is displayed.
4. Press the < > button until [Maintenance
Mode] is displayed.
5. Press the < > button to accept the
selection.
[Adjust Paper Type] is displayed.
6. Press the < > button until [Adjust BTR] is
displayed.
7. Press the < > button to accept the
selection.
A screen that allows you to set the paper
type is displayed.
8. Press the < > button until the desired
paper type is displayed. (Example: Bond
Paper)
9. Press the < > button to accept the
selection.
The current setting is displayed.
10. Enter the new value using the < > or < >
button. (Example:10)
200
7 Maintenance
Menu
Print Language
Menu
Admin Menu
Admin Menu
Network / Port
Admin Menu
Maintenance Mode
Maintenance Mode
Adjust PaperType
Maintenance Mode
Adjust BTR
Adjust BTR
Plain Paper
Adjust BTR
Bond Paper
Bond Paper
0*
Bond Paper
10