Xerox DocuPrint C3055 User Manual page 102

[NetWare]
Set this when using the NetWare port.
Note
• [NetWare] appears only when the network expansion card (optional) is installed.
Setting Item
Port Status
Print Mode
102
5 Control Panel Menus
Network / Port
NetWare
Sets whether to enable or disable the NetWare port at printer start-up.
When [Enable] is selected, select TCP/IP or IPX/SPX.
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.
Sets the method of processing data (print language).
• [Auto] (default)
After receiving data from a computer, the printer automatically detects its
print language and processes the data accordingly. (See *1 on P. 131.)
• [ESC/P], [PDF], [PS], [PCL]
After receiving data from a computer, the printer processes the data with the
selected print language.
• [HexDump]
Allows you to view data received from a computer by printing it in ASCII
codes (hexadecimal format). (See *3 on P. 131.)
Note
• On the DocuPrint C3055, [PS] appears only when the PostScript software kit
(optional) is installed.
NetWare
Port Status
NetWare
Print Mode
Description
Port Status
NetWare TCP/IP
Port Status
NetWare IPX/SPX