1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Printer
  5. DocuPrint C3120 DX
  6. User manual

Xerox DocuPrint C3120 DX User Manual

Xerox printers user guide
Hide thumbs Also See for DocuPrint C3120 DX:
Table of Contents

Advertisement

Quick Links

Download this manual
DocuPrint C3210 DX
®
PostScript
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Xerox DocuPrint C3120 DX

Summary of Contents for Xerox DocuPrint C3120 DX

  • Page 1 DocuPrint C3210 DX ® PostScript User Guide...
  • Page 2 4. Never attempt any procedure on the machine that is not specifically described in this manual. Unauthor- ized operation can cause faults or accidents. Fuji Xerox is not liable for any problems resulting from unau- thorized operation of the equipment.

  • Page 3: Table Of Contents

    Contents Preface ....................6 Types of Manuals ................7 Conventions ..................8 Organization ..................9 1 Installation and Configuration on Windows 98/Me ....11 About the Software ................11 Included Software ................11 Hardware/Software Requirements ..........12 Computer System ................12 Basic Software ..................12 Installing the Print Driver ..............12 Installation Procedure ..............
  • Page 4 Adding the Printer ................69 Procedure (Mac OS X 10.2.8/10.3.9) ..........70 Procedure (Mac OS X 10.4.6) ............71 Configuring the Print Driver .............73 Installable Options ................73 Setting Items ..................73 Fuji Xerox Features ................74 Setting Items ..................74 Image Options ..................76...
  • Page 5 Setting Items ..................76 Job Type (Mac OS X 10.3.9 and 10.4.6 Only) ........ 78 Setting Items ..................79 Job Accounting (Mac OS X 10.3.9 and 10.4.6 Only) ....... 80 Setting items ..................80 5 Barcode Settings ..............83 About Barcodes ................83 Font Types and Character Codes ........... 83 Sample Program and Output Result ..........

  • Page 6: Preface

    Preface Thank you for purchasing the DocuPrint C3210 DX. This guide describes the software included on the PostScript Driver Library CD-ROM and how to install and configure a PostScript print driver on your computer. To get the most out of this printer and to use it effectively, please read this guide before use.

  • Page 7: Types Of Manuals

    Types of Manuals The following manuals are provided for this printer: Setup Guide Explains the way of installation of this printer. Quick Reference Guide Explains the way of setting, loading paper, and troubleshooting of this printer. User Guide (PDF) Explains printer settings, and describes control panel menu items, and daily care in detail.

  • Page 8: Conventions

    Conventions The following conventions are used throughout this guide: Square brackets ([ ]) Indicates the names of windows, dialog boxes, tabs, buttons, features, menus, setting items, and options that appear on your computer screen. For example: • You can also browse the folder by clicking [Browse]. Greater-than sign (>) Indicates the hierarchies of the menus, setting items, and options that appear on your computer screen.

  • Page 9: Organization

    Organization This guide is organized into the following chapters. The summary of each chapter is as follows: Chapter 1 Describes how to install and configure a Installation and Configuration on PostScript print driver on Windows 98 or Windows 98/Me Windows Me. Chapter 2 Describes how to install and configure a Installation and Configuration on...

  • Page 11: Installation And Configuration On Windows 98/Me

    Installation and Configuration on Windows 98/Me 1 Installation and Configuration on Windows 98/Me This chapter includes the following information: • About the Software – Included Software – Hardware/Software Requirements • Installing the Print Driver – Installation Procedure • Configuring the Print Driver –...

  • Page 12: Hardware/Software Requirements

    Installation and Configuration on Windows 98/Me Hardware/Software Requirements The system requirements for the print driver for Windows 98 and Windows Me are as follows: Computer System Personal computer on which Windows 98 or Windows Me is installed. Basic Software • Windows 98 •...
  • Page 13 Installation and Configuration on Windows 98/Me If the printer is directly connected to your computer, select [Local printer]. Otherwise, select [Network printer]. After selecting the connection method, select [Next]. In this example, we will select [Local printer]. NOTE: When [Network printer] is selected, specify the path to the printer in the network path or queue name box.
  • Page 14 Installation and Configuration on Windows 98/Me In the [Copy manufacturer’s files from:] box, enter the drive in which the CD-ROM is located (example: "E:"). After the drive name, enter “\English\DPC3210DX\Win9x_Me”, and then click [OK]. NOTE: You can also browse the folder by clicking [Browse]. From [Printers], select the model of your printer, and then click [Next].
  • Page 15 Installation and Configuration on Windows 98/Me Enter a name for your printer, specify whether to use the printer as the default printer, and then click [Next]. Specify whether to print a test page and click [Finish]. The installation begins.
  • Page 16 Installation and Configuration on Windows 98/Me Read [End User License Agreement]. If you accept the license agreement, click [Agree]. If you clicked [Disagree], see When [Disagree] is Clicked in the License Agreement on page 17. Check if the test page is printed and the printer is added to the [Printers] window. This completes the installation of the print driver.

  • Page 17: When [Disagree] Is Clicked In The License Agreement

    Installation and Configuration on Windows 98/Me When [Disagree] is Clicked in the License Agreement The following dialog box appears if you click [Disagree] in [End User License Agreement]. Click [No] to continue the installation. Click [Yes] to cancel the installation. This operation adds the printer to the [Printers] window, but does not correctly install the print driver.

  • Page 18: Configuring The Print Driver

    Installation and Configuration on Windows 98/Me Configuring the Print Driver This section describes the following tabs in the print driver properties that are specific to this printer. • [Configuration] tab • [Options] tab • [Color Settings] tab • [Output Settings] tab NOTE: For information about other tabs, see the online help for the print driver.

  • Page 19: Setting Items

    Installation and Configuration on Windows 98/Me Setting Items Bypass Feed Orientation - Sets the orientation of the paper when printing from the bypass tray. When loading the paper with one of the short edges facing into the bypass tray, select [Portrait]. When loading the paper with one of the long edges facing into the bypass tray, select [Landscape].
  • Page 20 Installation and Configuration on Windows 98/Me High speed for monochrome documents - Increases the print speed of monochrome pages when printing both color and monochrome pages. Selecting [On] prints monochrome pages faster than color pages. Selecting [Off] prints monochrome and color pages at the same speed.

  • Page 21: [Options] Tab

    Installation and Configuration on Windows 98/Me - Specify User ID - Sets the method of specifying a user ID. - User ID - Sets a user ID with up to 32 alphanumeric characters. - Password - Sets the password for the user ID using 4 to 12 alphanumeric characters.

  • Page 22: Setting Items

    Installation and Configuration on Windows 98/Me Setting Items Paper Tray Configuration - Sets the paper tray configuration of the printer. RAM Disk - Sets whether or not the RAM disk is installed in the printer. Memory - Sets the memory capacity of the printer. [Color Settings] Tab The following explains how to configure the [Color Settings] tab.
  • Page 23 Installation and Configuration on Windows 98/Me High Resolution - This mode is suitable for documents that consist of fine lines. The printer clearly prints fine characters, fine lines, and fine parts of photos. Image Types - Sets the type of your document. Standard - Optimizes the printing of business documents that consist of texts and graphs.

  • Page 24: [Output Settings] Tab

    Installation and Configuration on Windows 98/Me [Output Settings] Tab The following explains how to configure the [Output Settings] tab. Setting Items Job Type - Sets the type of your print job to [Normal Print], [Secure Print], or [Sample Set]. Normal Print - Prints a job without using the Secure Print or Sample Set feature. Secure Print - Temporarily stores a print job in the printer, rather than printing it immediately, until you manually start the printing from the control panel.
  • Page 25 Installation and Configuration on Windows 98/Me Document Name - When [Retrieve Document Name] is set to [Enter Document Name], enter the document name with up to 12 alphanumeric characters. Fit to New Paper Size - Sets the size of the output paper. The document will be automatically reduced/enlarged based on this setting and the [Paper size] setting on the [Paper] tab.

  • Page 26: Using The Online Help

    Installation and Configuration on Windows 98/Me Using the Online Help This section describes how to use the online help. Click the [ ] button on the print driver dialog box. The [?] mark appears next to your mouse pointer. Then, click an item you need help with. The description of the item pops up.

  • Page 27: Installation And Configuration On Windows Nt 4.0

    2 Installation and Configuration on Windows NT 4.0 This chapter contains the following information: • About the Software – Included Software – Hardware/Software Requirements • Installing the Print Driver – Installation Procedure • Configuring the Print Driver – [Device Settings] tab –...

  • Page 28: Hardware/Software Requirements

    Installation and Configuration on Windows NT 4.0 Adobe Acrobat Reader - Allows you to view and print PDF files on all major computing platforms. Readme.txt - Describes the precautions that must be followed when using the print driver. Be sure to read this before using the print driver. Hardware/Software Requirements The system requirements for the print driver for Windows NT 4.0 are as follows: Computer System...
  • Page 29 Installation and Configuration on Windows NT 4.0 If the printer is directly connected to your computer or to a network in a TCP/IP (LPD) environment, select [My Computer]. Otherwise, select [Network printer server]. After selecting the connection method, select [Next]. In this example, we will select [My Computer].
  • Page 30 Installation and Configuration on Windows NT 4.0 Click [Have Disk]. In the [Copy manufacturer’s files from:] box, enter the drive in which the CD-ROM is located (example: "E:"). After the drive name, enter “\English\DPC3210DX\WinNT40”, and then click [OK]. NOTE: You can also browse the folder by clicking [Browse]. From [Printers], select the model of your printer, and then click [Next].
  • Page 31 Installation and Configuration on Windows NT 4.0 Enter a name for your printer, specify whether to use the printer as the default printer, and then click [Next]. Select [Not shared] and click [Next].
  • Page 32 Installation and Configuration on Windows NT 4.0 Specify whether to print a test page and click [Finish]. The installation begins. Read [End User License Agreement]. If you accept the license agreement, click [Agree]. If you clicked [Disagree], see When [Disagree] is Clicked in the License Agreement on page 33.

  • Page 33: When [Disagree] Is Clicked In The License Agreement

    Installation and Configuration on Windows NT 4.0 Check if the test page is printed and the printer is added to the [Printers] window. This completes the installation of the print driver. Remove the CD-ROM from the CD- ROM drive. To configure the print driver, see Configuring the Print Driver on page 34. Store the CD-ROM in a safe place.

  • Page 34: Configuring The Print Driver

    Installation and Configuration on Windows NT 4.0 Configuring the Print Driver This section describes the following tabs in the print driver properties that are specific to this printer. • [Device Settings] tab • [Configuration] tab • [Advanced] tab • [Paper/Output] tab •...

  • Page 35: Setting Items

    Installation and Configuration on Windows NT 4.0 Setting Items Memory - Sets the memory capacity of the printer. Paper Tray Configuration - Sets the paper tray configuration of the printer. RAM Disk - Sets whether or not the RAM disk is installed in the printer. Color Mode - Selecting [Black] fixes the [Image Options] tab >...

  • Page 36: [Advanced] Tab

    Installation and Configuration on Windows NT 4.0 - Password - Sets the password for the user ID using 4 to 12 alphanumeric characters. Prompt User for Settings - Selecting this check box displays the [Enter User Details] dialog box every time you request a print job. Your job will be printed if you enter the ID and password in this dialog box.

  • Page 37: Setting Items

    Installation and Configuration on Windows NT 4.0 Setting Items Transparency Separators Feed Separators from - Sets the paper tray for separators when using the Transparency Separators feature. Selecting [Auto] uses the paper tray selected on the printer. Print on Separators - Sets whether or not to print on separators. Selecting [Blank Separators] inserts blank separators.
  • Page 38 Installation and Configuration on Windows NT 4.0 - Feed from Bypass Tray - Feeds the paper from the bypass tray when it is not loaded in the paper trays. Custom Paper Auto Orientation - If printing on user-defined paper, selecting [On] corrects the orientation of the paper.

  • Page 39: [Paper/Output] Tab

    Installation and Configuration on Windows NT 4.0 [Paper/Output] Tab The following explains how to configure the [Paper/Output] tab in the Default dialog box. Setting Items Job Type - Sets the type of your print job to [Normal Print], [Secure Print], or [Sample Set].
  • Page 40 Installation and Configuration on Windows NT 4.0 Document Name - Sets the method of naming the document that will be stored in the printer using the Secure Print or Sample Set feature. [Use Existing Name] automatically retrieves the document name from the application from which the document will be printed.

  • Page 41: [Image Options] Tab

    Installation and Configuration on Windows NT 4.0 [Image Options] Tab The following explains how to configure the [Image Options] tab in the Default dialog box. Setting Items Print Mode - Sets whether to print in [High Speed], [High Quality], or [High Resolution] mode.
  • Page 42 Installation and Configuration on Windows NT 4.0 NOTE: The [Image Adjustment] button is inactive and cannot be selected when the [Paper/Output] tab > [Output Color] is [Black and White]. RGB Color Correction - Sets the color correction method for the RGB images on your document.

  • Page 43: [Layout] Tab

    Installation and Configuration on Windows NT 4.0 Color Balance - Displays the [Color Balance] dialog box. Adjust Color Balance - Selecting the check box allows you to adjust the density of the CMYK (cyan/magenta/yellow/black) toners. To adjust the density of a color, select the color from [Target Color] and specify its density for [Highlights], [Midtones], and [Shadows].

  • Page 44: Using The Online Help

    Installation and Configuration on Windows NT 4.0 Using the Online Help This section describes how to use the online help. Click the [ ] button on the print driver dialog box. The [?] mark appears next to your mouse pointer. Then, click an item you need help with. The description of the item pops up.

  • Page 45: Installation And Configuration On Windows 2000/Xp/ Windows Server 2003

    3 Installation and Configuration on Windows 2000/XP/Windows Server 2003 This chapter contains the following information: • About the Software – Included Software – Hardware/Software Requirements • Installing the Print Driver – Installation Procedure • Configuring the Print Driver – [Device Settings] tab –...

  • Page 46: Hardware/Software Requirements

    Installation and Configuration on Windows 2000/XP/Windows Server 2003 Hardware/Software Requirements The system requirements for the print driver for Windows 2000, Windows XP, and Windows Server 2003 are as follows: Computer System Personal computer on which the Windows 2000, Windows XP, or Windows Server 2003 is installed.
  • Page 47 Installation and Configuration on Windows 2000/XP/Windows Server 2003 Click [Next]. If the printer is directly connected to your computer or over a network in a TCP/IP (LPD) environment, select [Local printer attached to this computer]. Otherwise, select [A network printer, or a printer attached to another computer]. After selecting the connection method, click [Next].
  • Page 48 Installation and Configuration on Windows 2000/XP/Windows Server 2003 Select the port you want to use and click [Next]. When the printer is installed in a TCP/IP(LPD) environment: 1) Click [Create a new port]. 2) Select [Standard TCP/IP Port] from the [Type of port] list and click [Next]. 3) Click [Next].
  • Page 49 Installation and Configuration on Windows 2000/XP/Windows Server 2003 4) Enter the IP address of the printer in [Printer Name or IP Address] and click [Next]. Click [Finish] in the displayed dialog box. Insert the PostScript Driver Library CD-ROM into your CD-ROM drive. Click [Have Disk].
  • Page 50 Installation and Configuration on Windows 2000/XP/Windows Server 2003 In the [Copy manufacturer’s files from:] box, enter the drive in which the CD-ROM is located (example: "E:"). After the drive name, enter “\English\DPC3210DX\Win2K_XP”, and then click [OK]. NOTE: You can also browse the folder by clicking [Browse]. From [Printers], select the model of your printer, and then click [Next].
  • Page 51 Installation and Configuration on Windows 2000/XP/Windows Server 2003 Enter a name for your printer, specify whether to use the printer as the default printer, and then click [Next]. Select [Do not share this printer] and click [Next].
  • Page 52 Installation and Configuration on Windows 2000/XP/Windows Server 2003 Specify whether to print a test page and click [Next]. Click [Finish]. NOTE: If the message "The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP" appears, click [Continue Anyway] to continue the installation.
  • Page 53 Installation and Configuration on Windows 2000/XP/Windows Server 2003 Check if the printer is added to the [Printers] window. This completes the installation of the print driver. Remove the CD-ROM from the CD- ROM drive. To configure the print driver, see "Configuring the Print Driver" (P. 54). Store the CD-ROM in a safe place.

  • Page 54: Configuring The Print Driver

    Installation and Configuration on Windows 2000/XP/Windows Server 2003 Configuring the Print Driver This section describes the following tabs in the print driver properties that are specific to this printer. • [Device Settings] tab • [Configuration] tab • [Advanced] tab • [Paper/Output] tab •...

  • Page 55: Setting Items

    Installation and Configuration on Windows 2000/XP/Windows Server 2003 Setting Items Memory - Sets the memory capacity of the printer. Paper Tray Configuration - Sets the paper tray configuration of the printer. RAM Disk - Sets whether or not the RAM disk is installed in the printer. Color Mode - Selecting [Black] fixes the [Image Options] tab >...
  • Page 56 Installation and Configuration on Windows 2000/XP/Windows Server 2003 - User ID - Sets a user ID with up to 32 alphanumeric characters. - Password - Sets the password for the user ID using 4 to 12 alphanumeric characters. Prompt User for Settings - Selecting this check box displays the [Enter User Details] dialog box every time you request a print job.

  • Page 57: [Advanced] Tab

    Installation and Configuration on Windows 2000/XP/Windows Server 2003 [Advanced] Tab The following explains how to configure the [Advanced] tab in the Printing Preferences dialog box. Select an item you want to configure, and select its option from the menu that appears on the right.
  • Page 58 Installation and Configuration on Windows 2000/XP/Windows Server 2003 Advanced Features Image Rotation 180 Degrees - Rotates the landscape or portrait pages in your document by 180 degrees. When the [Layout] tab > [Multiple-Up] is set to an option other than [1 Page Up], this rotates all pages by 180 degrees. Print in Reverse Order - Selecting [On] prints your document in reverse order.

  • Page 59: [Paper/Output] Tab

    Installation and Configuration on Windows 2000/XP/Windows Server 2003 Use Document Monitor - Sets whether or not to use the Document Monitor feature. NOTE: [Use Document Monitor] appears only when CentreWare is installed on your computer. Modify Dash/Dot Lines of Output - If you print from Microsoft Excel, dash or dotted lines may be printed as solid lines.
  • Page 60 Installation and Configuration on Windows 2000/XP/Windows Server 2003 Secure Print - Temporarily stores a print job in the printer, rather than printing it immediately, until you manually start the printing from the control panel. Sample Set - Allows you to print a proof copy of a multi-set job and prints the entire sets once the print result has been verified.

  • Page 61: [Image Options] Tab

    Installation and Configuration on Windows 2000/XP/Windows Server 2003 [Image Options] Tab The following explains how to configure the [Image Options] tab in the Printing Preferences dialog box. Setting Items Print Mode - Sets whether to print in [High Speed], [High Quality], or [High Resolution] mode.
  • Page 62 Installation and Configuration on Windows 2000/XP/Windows Server 2003 Image Adjustment - Displays the [Image Adjustment] dialog box. NOTE: The [Image Adjustment] button is inactive and cannot be selected when the [Paper/Output] tab > [Output Color] is [Black and White]. RGB Color Correction - Sets the color correction method for the RGB images on your document.

  • Page 63: [Layout] Tab

    Installation and Configuration on Windows 2000/XP/Windows Server 2003 Gradation - Optimizes the reproduction of charts and graphs. Color Balance - Displays the [Color Balance] dialog box. Adjust Color Balance - Selecting the check box allows you to adjust the density of the CMYK (cyan/magenta/yellow/black) toners.

  • Page 64: Using The Online Help

    Installation and Configuration on Windows 2000/XP/Windows Server 2003 Using the Online Help The following explains how to use the online help. Click the [ ] button on the print driver dialog box. The [?] mark appears next to your mouse pointer. Then, click an item you need help with. The description of the item pops up.

  • Page 65: Installation And Configuration On Mac Os

    PPD file - The PPD files for Mac OS X 10.2.8, Mac OS X 10.3.9, and Mac OS X 10.4.6. Fuji Xerox PPD Installer - The PPD install package for Mac OS X 10.2.8. Fuji Xerox Plugin Installer - The PPD install package for Mac OS X 10.3.9 and Mac OS X 10.4.6.

  • Page 66: Hardware/Software Requirements

    Mac OS X 10.4.6 are as follows: Computer System • Macintosh • Power Macintosh • Intel CPU-based Macintosh PPD Install/Plug-in Install Package • Fuji Xerox PPD Installer - Mac OS X 10.2.8 • Fuji Xerox Plugin Installer - Mac OS X 10.3.9 and 10.4.6...

  • Page 67: Installing A Ppd File

    This section describes how to install a PPD file on Mac OS X 10.2.8, Mac OS X 10.3.9, or Mac OS X 10.4.6. To install a PPD file on Mac OS X 10.2.8, use Fuji Xerox PPD Installer. On Mac OS X 10.3.9 and Mac OS X 10.4.6, use Fuji Xerox Plugin Installer.
  • Page 68 Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 Read the license agreement. If you agree, click [Accept]. Verify the installation location and click [Install]. A dialog box that informs you that the installation is complete appears. Click [Quit] in the dialog box. This completes the installation of the PPD file.

  • Page 69: Adding The Printer

    Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 Adding the Printer When you are finished installing a PPD file, configure it on your print driver and add the printer to the [Printer List] window. The print driver controls the printer’s features based on the information stored in the PPD file.

  • Page 70: Procedure (Mac Os X 10.2.8/10.3.9)

    Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 Procedure (Mac OS X 10.2.8/10.3.9) The following procedure uses Mac X 10.3.9 as an example. On Mac OS X 10.2.8, the procedure and some of the field names may be different. When Using IP Printing Select [IP Printing] from the menu, select [LPD/LPR] from [Printer Type], and enter the printer’s IP address in [Printer Address].

  • Page 71: Procedure (Mac Os X 10.4.6)

    Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 When Using Rendezvous (Bonjour) Select [Rendezvous] from the menu, and select the printer you want to use from [Name]. From [Printer Model], select [FX]. From [Model Name], select the PPD file for your printer model. Click [Add].
  • Page 72 Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 Make sure that the printer is selected in [Print Using]. When the printer is not selected, select [FX] in [Print Using]. From the list of model names, select the PPD file for your printer model. Click [Add].

  • Page 73: Configuring The Print Driver

    Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 Configuring the Print Driver This section describes how to configure the [Installable Options], [Fuji Xerox Features], [Image Options], [Job Type] (Mac OS X 10.3.9/10.4.6 only), and [Job Accounting] (Mac OS X 10.3.9/10.4.6 only) windows on your print driver.

  • Page 74: Fuji Xerox Features

    Set the desired features. Setting Items The items in [Fuji Xerox Features] vary depending on the options installed on the printer. Make sure to set these items after configuring [Installable Options]. For details on [Installable Options], see Installable Options on page 73.
  • Page 75 Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 orientation can only be one way or the other depending on the paper size, the actual orientation of the paper overrides this setting. Feed Separators from - Sets the paper tray for separators when using the Transparency Separators feature.

  • Page 76: Image Options

    Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 Image Options The following explains how to configure the [Image Options] window. On your application, click [Print] from the [File] menu. The [Print] dialog box appears. Select [Image Options]. Set the desired features. Setting Items Output Color - Sets whether to print in color or in monochrome.
  • Page 77 Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 High Quality - This mode is suitable for documents of high image quality. The printer performs appropriate adjustments for photos, texts, and graphics respectively. High Resolution - This mode is suitable for documents that consist of fine lines. The printer clearly prints fine characters, fine lines, and fine parts of photos.

  • Page 78: Job Type (Mac Os X 10.3.9 And 10.4.6 Only)

    Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 Off - Does not perform color correction. Screen - Adjusts the image quality of your document. Auto - Automatically adjusts the image quality based on the type of the document. Fineness - Optimizes the reproduction of texts and lines. Standard - Optimizes the reproduction of photographic images.

  • Page 79: Setting Items

    Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 Set the desired features. Setting Items Job Type - Sets the type of your print job to [Normal Print], [Secure Print], or [Sample Set]. Normal Print - Prints a job without using the Secure Print or Sample Set feature. Secure Print - Temporarily stores a print job in the printer, rather than printing it immediately, until you manually start the printing from the control panel.

  • Page 80: Job Accounting (Mac Os X 10.3.9 And 10.4.6 Only)

    Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 Job Accounting (Mac OS X 10.3.9 and 10.4.6 Only) The following explains how to configure the [Job Accounting] window. On your application, click [Print] from the [File] menu. The [Print] dialog box appears. Select [Job Accounting].
  • Page 81 Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6 Passcode - Sets the password for the user ID using 4 to 12 alphanumeric characters. Prompt User for Settings - Selecting this check box displays a dialog box that prompts you to enter the user ID and password every time you request a print job. Your job will be printed if you enter the user ID and password in the dialog box.
  • Page 82 Installation and Configuration on Mac OS X 10.2.8/10.3.9/10.4.6...

  • Page 83: Barcode Settings

    5 Barcode Settings This chapter contains the following information: • About Barcodes – Font Types and Character Codes – Sample Program and Output Result • Character Code Tables – JAN Character Code Table – Code 39 Character Code Table – NW7 Character Code Table –...

  • Page 84: Sample Program And Output Result

    Barcode Settings Barcode Type PostScript Font Name Character Code Code 128 HitachiITHINC128H8-RG "Code 128 Character Code Table" (P. HitachiITHINITFH8-RG "ITF (Interleaved 2 of 5) (without bearer bars) Character Code Table" (P. 92) HitachiITHINITFB-RG (with bearer bars) Customer Barcode HitachiITHINPOSTBC-RG "Customer Barcode Character Code Table"(P.

  • Page 85: Character Code Tables

    Barcode Settings Character Code Tables This section describes the character codes used when specifying each barcode character. JAN Character Code Table The table below lists the characters codes used when printing JAN barcode characters. Character Code Left-side Odd Parity Left-side Even Parity Right-side Even Parity Character ASCII...

  • Page 86: Code 39 Character Code Table

    Barcode Settings Code 39 Character Code Table The table below lists the characters codes used when printing Code 39 barcode characters. Character Code Character Code Character Code Character Character Character ASCII ASCII ASCII Notation Notation Notation Notation Notation Notation (SP) (SP)

  • Page 87: Nw7 Character Code Table

    Barcode Settings NW7 Character Code Table The table below lists the characters codes used when printing NW7 barcode characters. Character Code Character Code Character Code Character Character Character ASCII ASCII ASCII Notation Notation Notation Notation Notation Notation...

  • Page 88: Code 128 Character Code Table

    Barcode Settings Code 128 Character Code Table The table below lists the characters codes used when printing Code 128 barcode characters. Character Code Character Code Value ASCII CODE A CODE B CODE C Notation Notation " " " & & &...
  • Page 89 Barcode Settings Character Code Character Code Value ASCII CODE A CODE B CODE C Notation Notation > > >...
  • Page 90 Barcode Settings Character Code Character Code Value ASCII CODE A CODE B CODE C Notation Notation FNC 3 FNC 3 FNC 2 FNC 2 SHIFT SHIFT CODE C CODE C...
  • Page 91 Barcode Settings Character Code Character Code Value ASCII CODE A CODE B CODE C Notation Notation CODE B FNC 4 CODE B FNC 4 CODE A CODE A FNC 1 FNC 1 FNC 1 START(CODE A) START(CODE B) START(CODE C) STOP...

  • Page 92: Itf (Interleaved 2 Of 5) Character Code Table

    Barcode Settings ITF (Interleaved 2 of 5) Character Code Table The table below lists the characters codes used when printing ITF barcode characters. Character Code Character Code Character Code Character Character Character ASCII ASCII ASCII Notation Notation Notation Notation Notation Notation "...
  • Page 93 Barcode Settings Character Code Character Code Character Code Character Character Character ASCII ASCII ASCII Notation Notation Notation Notation Notation Notation START STOP ITF barcodes represent a pair of a BAR character (character denoted with a bar) and a SPACE character (character denoted with a space) with one character code.

  • Page 94: Customer Barcode Character Code Table

    Barcode Settings Customer Barcode Character Code Table The table below lists the characters codes used when printing customer barcode characters. Character Code Character Code Character Character ASCII ASCII Notation Notation Notation Notation START < STOP >...

  • Page 95: Barcode Sizes

    Barcode Settings Barcode Sizes The formulas for determining the approximate print sizes of barcodes are in the following table. The print sizes of barcodes vary depending on the characteristics of the printer, print resolution, output paper, and other factors even when the same program is used. The sizes derived from the following formulas do not guarantee the actual sizes of barcodes.
  • Page 96 Barcode Settings...

  • Page 97: Appendix

    6 Appendix Built-in Fonts The following 136 PostScript fonts and barcode/OCR-B fonts are built into the printer: Albertus Albertus Italic Albertus Light Antique Olive Bold Antique Olive Compact Antique Olive Italic Antique Olive Roman Apple Chancery Arial Arial Bold Arial Bold Italic Arial Italic Bodoni Bold Bodoni Bold Italic...
  • Page 98 Appendix Courier Courier Bold Courier Bold Oblique Courier Oblique Eurostile Bold Eurostile Bold Extended No. 2 Eurostile Extended No. 2 Eurostile Medium Geneva Gill Sans Gill Sans Bold Gill Sans Bold Italic Gill Sans Condensed Gill Sans Condensed Bold Gill Sans Extra Bold Gill Sans Italic Gill Sans Light Gill Sans Light Italic...
  • Page 99 Appendix Hoefler Text Hoefler Text Black Hoefler Text Black Italic Hoefler Text Italic ITC Avant Garde Gothic Book ITC Avant Garde Gothic Book Oblique ITC Avant Garde Gothic Demi ITC Avant Garde Gothic Demi Oblique ITC Bookman Demi ITC Bookman Demi Italic ITC Bookman Light ITC Bookman Light Italic ITC Lubalin Graph Book...
  • Page 100 Appendix Optima Italic Optima Roman Oxford Palatino Bold Palatino Bold Italic Palatino Italic Palatino Roman Stempel Garamond Bold Stempel Garamond Bold Italic Stempel Garamond Italic Stempel Garamond Roman Symbol Tekton Regular Times Bold Times Bold Italic Times Italic Times Roman Times New Roman Times New Roman Bold Times New Roman Bold Italic...

  • Page 101: Notes And Restrictions

    Appendix OCR-B Letterpress M Hitachi-IT Barcode Code39 H8 Hitachi-IT Barcode Code128 H8 Hitachi-IT Barcode ITFB Hitachi-IT Barcode ITF H8 Hitachi-IT Barcode JAN H8 Hitachi-IT Barcode NW-7 H8 Hitachi-IT Barcode POSTBC Notes and Restrictions Print Driver The notes and restrictions that apply to each PostScript print driver is described in "Readme.txt"...
  • Page 102 Appendix...

  • Page 103: Index

    Output Settings tab ......24 Device Settings tab ..... 34 Paper/Output tab ........ 59 ........11 error codes ..........101 error messages .........101 Readme.txt ......11 fonts, supported ........97 supported fonts ........97 Fuji Xerox Features ......74 Windows 2000 ........45 Image Options tab ......61...
  • Page 104 Index Windows 98 .......... 12 Windows Me ........12 Windows NT 4.0 ......... 27 Windows Server 2003 ....... 45 Windows XP ......... 45...
  • Page 105 ® DocuPrint C3210 DX PostScript User Guide ME3789E2-1 (Edition 1) Human Interface Design Development © Fuji Xerox Co., Ltd. Copyright 2006 by Fuji Xerox Co., Ltd.

Table of Contents