[Calibration]
If colors look off after relocating the printer, or after replacing the drum cartridge, print the
Calibration Chart to perform color calibration.
For details on color calibration, refer to "7.9 Adjusting Color Density" (P. 194).
Setting Item
Chart Print
Enter Value
[Non Condensing]
Setting Item
Non Condensing
128
5 Control Panel Menus
Maintenance Mode
Calibration
Prints the Calibration Chart when the <Eject/Set> button is pressed.
Adjusts the density of cyan (C), magenta (M), yellow (Y), and black (K).
• [-6] to [6] (default: [0])
Maintenance Mode
Non Condensing
Sets whether to enable the Non-condensing mode to avoid dew condensation.
• [Disable] (default)
• [Enable]
Refer to
• "6.8 Non-condensing Mode" (P. 159)
Calibration
Chart Print
Calibration
Enter Value
Description
Description