Xerox DocuPrint C3055 User Manual page 157

Symptom
The [Refresh] button does not
work.
The contents in the right frame
does not change even when a
different topic is selected in the
left frame.
The service is slow.
The contents projected on the
screen is distorted.
Clicking [Apply] does not reflect
the new settings.
Forgot the system administrator
ID or password and unable to
change the settings.
The service does not accept the
user ID or password.
The display language is not what
you desire.
The connection to CentreWare
Internet Services was rejected, or
a message "The page does not
contain data" is displayed.
Buttons are displayed as URL
links.
Is your operating system or web browser supported by CentreWare Internet
Services?
Refer to"1.5 Configuring the Printer Using CentreWare Internet Services" (P. 28) to
see if your operating system or web browser is supported by the service.
If your browser is using a proxy server, the window may not refresh properly or may
become slow.
Access CentreWare Internet Services without using a proxy server.
Old information may be cached on your web browser.
Clear all the information cached on the web browser.
Change the window or font size setting on the web browser.
Did you enter the values correctly?
If the values are not valid, an error message will be displayed. Check if the values
are entered correctly.
The default user ID and password of the administrator of CentreWare Internet
Services are:
• User ID: 11111
• password: x-admin
If you cannot recall the ID and password, initialize the setting under [Init/Del Data] >
[Init/NetworkPort] on the control panel. This operation, however, initializes the entire
network-related settings to the defaults. Before initializing the settings, we suggest
you to record the current settings by printing out the [Printer Settings] list.
If you fail to log in four times in a row after switching the power on or after the last
successful login, you will be locked out of the service. Depending on the web
browser you are using, the login window does not close until you cancel the login
attempt.
In such case, reboot the printer and try logging in again.
Change the display language setting on your web browser.
Refer to
• Online help for you web browser.
If you access the printer simultaneously from multiple web browsers or
StatusMessenger of different languages, the character strings obtained from the
printer may be different from the language setting on the web browsers. If this is the
case, refresh the web browsers.
This problem can happen, also when your web browser is using a proxy server.
Trying accessing the service without using a proxy server.
Refer to
• Online help for your web browser
This may happen if you refresh your web browser too often. Try not to refresh the
web browser frequently.
Also, do not leave the [Status] or [Jobs] tab displayed on multiple browsers.
Some buttons on the service use JavaScript. Such buttons do not appear when
JavaScript is not running or disabled. In such case, the buttons are displayed as URL
links.
We suggest you to enable JavaScript on your web browser.
Cause/Remedy
6.7 Network-related Problems
157